The WIRING SYSTEM is a decorative 230 V pendant light system: several luminaires are distributed freely across the ceiling from a single surface-mounted canopy. The cables run visibly across the ceiling and are redirected at the desired points with tensioners. No flush-mounted box is needed for each luminaire, making the system ideal for renovations, concrete ceilings, restaurants, shops and homes.

How to put your system together:

1. Choose the canopy by number of luminaires and total power (Ø 165 mm up to 4 luminaires / 20 W, Ø 220 mm up to 8 luminaires / 40 W, Ø 285 mm up to 12 luminaires / 60 W). The total power of the luminaires must not exceed the canopy power.

2. Choose the control: On/Off or DALI dimmable. The control sits in the canopy and applies to all connected luminaires.

3. Choose the luminaires: Balo, Bell, Tao or Tube in 2700 K or 3000 K (Tube also 4000 K). The luminaires have no driver of their own; they are powered by the canopy.

4. Choose tensioners: one tensioner for each change of cable direction on the ceiling or wall.

Installation:

- Mount the canopy on the existing junction box and connect it (On/Off: L, N / DALI: L, N, DA1, DA2).

- Route each luminaire cable from the canopy across the ceiling to its position and redirect it with tensioners.

- Cable length per luminaire max. 10 m (horizontal on the ceiling + suspension height).

- Installation by a qualified electrician only.

- Canopy power: max. 20 / 40 / 60 W

- Output current: 500 mA

- Voltage: 230 V

- Protection rating: IP20

- Colour: matt black

- Warranty: 3 years