With the LED Strip SAL there is no need for soldering: wires up to 1 mm² are clamped directly onto the circuit board via solderless connection terminals, which speeds up installation considerably. It is available with 10 W/m or 20 W/m, each on 5 m or 30 m reels. The 10 W version with 140 LEDs per metre achieves 1090 lm/m at 2700 K, 1120 lm/m at 3000 K and 1190 lm/m at 4000 K with a 120° beam angle. The 24 V DC strip is fixed with 3M thermally conductive adhesive tape and dimmed via PWM dimmer; SDCM 3 binning and 50'000 h service life (LM80) ensure quality. Practical for installers in coves, furniture and shelf lighting indoors.

- Voltage: 24 V DC

- Power: 10 W/m

- Luminous flux: warm white 2700 K: 1090 lm/m · warm white 3000 K: 1120 lm/m · neutral white 4000 K: 1190 lm/m

- LEDs/m: 140

- Beam angle: 120°

- Protection rating: IP20

- Reel length: 5 m

- Binning: SDCM 3

- Dimmable: yes, PWM dimmer

- Mounting: 3M thermally conductive adhesive tape

- Service life: 50'000 h (LM80)